Safety Instructions For Maintenance; Possible Malfunctions - Bartscher 120.792 Mode D'emploi

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

7. Possible Malfunctions

Problem
Device can not be
turned on, or turns off
without obvious
cause.
Time and temperature
are set, START/STOP
has been pressed, but
the device does not
heat up
Message EE1 appears
on display
Cause
•
Plug improperly inserted
into socket
•
Safety fuse has blown
•
Safety thermostat has
come on
•
Damaged heating element
•
Damaged electronic
control
•
Connection to baking
chamber temperature
gauge has been cut
•
Damaged baking chamber
temperature gauge
•
Damaged electronic
control
Solution
•
Remove plug and insert
properly into socket
•
Check fuse, connect
device to another
socket
•
Remove plug, leave
device for several
minutes to cool, then
reactivate
•
Contact a sales agent
•
Contact a sales agent
•
Contact a sales agent
•
Contact a sales agent
•
Contact a sales agent
- 39 -