Safety Instructions For Maintenance - Bartscher A200.052 Mode D'emploi

Masquer les pouces Voir aussi pour A200.052:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Only use a soft cloth and make sure you never use any kind of abrasive agents or
o
pads which could scratch the surface.
Do not use steel wool for cleaning purposes. Parts of the steel wool can loosen and
o
settle in the stop valve and lead to damages of the seal faces.
If the device is used daily the whole faucet mechanism has to be cleaned once a
o
week. If the device is used less often, it may be cleaned less frequently. For
cleaning the faucet bonnet unscrew bonnet, remove silicone seat cup and wash the
parts in warm soapy water. Clean the inside of the faucet and the connection to the
device by using a small bottle brush.
CAUTION!
Never insert the brush in the assembled faucet since it will puncture the seat cup.
Never use any kind of inflammables for cleaning purposes as, in case of
o
reconnection, this increases the risk of fire and explosion.
In the case of water containing lime, a calcareous layer, which can have an
o
influence on the heating power of the device appears in the container, particularly at
the bottom of it. It is possible to remove this residue carefully by adding to water a
drop of vinegar or a lime remover available on the market and by boiling this
solution for a short time.
After removing lime rinse the container with clean water.
o
CAUTION!
Complaints will not be accepted if the device is not decalcified regularly as
described in the instruction manual.
Such complaints are no cases of warranty!
After cleaning you should apply a soft, dry cloth in order to wipe dry and polish the
o
surface.
Make sure the device has been cleaned properly before storing it in a dry place.
o

6.3 Safety instructions for maintenance

o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 29 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A200.057

Table des Matières