Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher A200.052 Mode D'emploi

•
After preserving, disconnect the device from the power socket (take out the plug!).
•
Take the jars out of the preserving pot. While doing that, use tongs for taking out
jars or a cloth so as to avoid burning your hand
•
Leave the water in the device to cool and then empty the pot.
CAUTION!
The device is equipped with protection against
overheating.
If the device happens to be empty when turned
on, the overheating protection will be activated.
Remove the plug from its socket and leave the
device to cool for approx. 30 minutes.
Next, press the RESET button located at the
bottom of the device.
The device is ready for use.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

The device should be cleaned regularly.
o
The surface of the device should be cleaned with a damp cloth. For tenacious stains a
o
mild detergent can be used. Do not use any sprays or aggressive detergents.
Clean the device thoroughly inside and rinse it with clean water.
o
- 28 -