Installation And Connection; Operating; Before First Use - Bartscher 120.792 Mode D'emploi

•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
The device is not designed for built-in or serial installation.
•
Keep a minimum distance of 10 cm from walls or other flammable objects.
•
Never place the device on the floor.
•
After setting up the device, remove the protective film from the external casing of the
device.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.3 Operating

Before first use

•
Wash the device with a mild cleaning agent and warm water.
•
Never use harsh cleaning substances or substances with chlorine additive.
•
Heat the device without food inside for 30 minutes at 100
unpleasant odour may be emitted coming from insulation, which will not recur during
future ose of the device.
°
C. During first use, an
- 31 -