Installation And Connection; Operating; Before Using - Bartscher Professional Mode D'emploi

5.2 Installation and connection

CAUTION!
The device may be installed by a qualified specialist only.
•
Discard the complete packing material after unpacking the device.
•
Place the device on top of a solid, even, safe and stable surface that tolerates the
weight.
•
Not at any time you should place the device on top of an inflammable surface (such
as: table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
Do not place the device near walls or other objects made of combustible materials.
Keep a minimum distance of 20 cm to between other objects and each side of the
device.
•
Avoid installation spots with close contact to water.

5.3 Operating

Before using

•
Remove the cover and remove the deep frying baskets from the device.
•
Remove the control box from the device by gently pulling it up and clean using a soft,
damp cloth, making sure that moisture does not get into the electrical system and
does not penetrate the box.
•
Clean the oil tank with a soft cloth and a mild detergent, then rinse with clean water
and dry.
•
Clean the cover, frying baskets and housing using a mild detergent and warm water.
•
Thoroughly dry all washed parts of the tank!
- 33 -