Operation - Ariens Sno-Tek 24E Manuel Du Propriétaire

Masquer les pouces Voir aussi pour Sno-Tek 24E:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
1
1. Oil Fill and Dipstick
2. Gas Tank and Cap
3. Recoil Starter Handle
4. Fuel Shut-off Valve
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
WARNING: To avoid injury to hands
and feet, always disengage clutches,
shut off engine, and wait for all
movement to stop before unclogging
or working on snow thrower.
Keep hands and feet away from
auger and impeller.
CONTROLS AND FEATURES
See Figures 13 for Controls and Features
locations.
Dual Handle Interlock
When attachment clutch and then traction
drive clutch are engaged, the attachment
clutch will remain engaged (lever down) if
released. To stop attachment, release traction
drive clutch and both clutches will disengage.
All manuals and user guides at all-guides.com
3
Figure 13

OPERATION

Traction Drive Clutch –
Left Hand Lever
NOTE: When traveling to or from the area to
be cleared, press down on the handlebars
enough to raise the front of the unit slightly off
the surface. Engage the traction drive clutch
without engaging the attachment clutch.
Attachment Clutch –
Right Hand Lever
GB - 15
7
8
5
6
5. Primer Bulb
6. Ignition Switch (Push /Pull)
7. Engine Shutoff Switch
8. Choke
Squeeze the traction drive
2
clutch lever against the
handlebar (1) to engage
wheel drive for propelling
unit. Forward speed will
1
vary according to snow
depth and moisture
content.
Release lever (2) to stop
movement.
Squeeze attachment
2
clutch lever against
handlebar (1) to
engage attachment.
Release both clutch
levers (2) to disengage
1
power and apply brake
to attachment.
3
4

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Sno-tek 28e920402920403

Table des Matières