Arneg H216 Mode D'emploi page 36

Wengen
English
20_1.Cleaning of the outer parts (Daily / Weekly)
Weekly clean all the outer parts of the cabinet by using neutral detergents for
domestic use compatible with the surfaces to be cleaned or lukewarm water and
soap, eliminating any detergent residue.
Rinse with clean water and dry with a soft rag.
20_2.Cleaning the internal parts (Monthly)
The purpose of cleaning the internal parts of the cabinet is to destroy the pathogenic
micro-organisms so as to ensure protection of the goods.
Before proceeding with the internal cleaning of a cabinet, you must:
Completely empty it out of any goods it contains;
Remove all the removable parts, such as display dishes, grid trays, etc.
Wash with lukewarm water (>40°C)
Disinfect with a detergent that contains an antibacterial;
Accurately dry with a soft cloth;
Carefully clean the bottom tank, the drip, and the grid that protects the water drain,
eliminating all foreign bodies that have fallen through the suction grid lifting, if
necessary, the sheet of the fans.
If there are ice formations, request the intervention of a Qualified Refrigeration
Technician.
20_3.Cleaning the parts in stainless steel
Certain situations can cause the formation of rust on the surfaces in steel:
iron remains left on damp surfaces, limestone, chlorine or ammonia based
detergents not rinsed properly, food incrustations or residues, salt-saline solutions,
dry residues of evaporated liquids.
Recent stains and rust:
clean with shampoo or neutral detergents, using a sponge or a rag. When finished,
eliminate any detergent residue, rinsing abundantly and thoroughly drying the
surfaces.
Old stains and rust:
use chemical substances on the stainless steel that contain 25% of nitric acid or
similar substances.
Die-hard stains and rust:
sandpaper or polish with a stainless steel brush. After this operation, wash with
detergents and carefully dry. This intervention may however cause scratches to the
surfaces due to the abrasive cleaning method.
20_4.Cleaning the EVERCLEAR doors (optional)
The EVERCLEAR doors are in coated glass, on the inner part, by a special
transparent coating that prevents the formation of condensate. Parts left to dry
with residues of detergent or disinfectant can be damaged.
DO NOT clean the internal part of the door with the same product used for
cleaning the external part.
DO NOT use abrasive products and solvents that may alter the surfaces of the
doors.
Follow the indications given below to clean the EVERCLEAR doors:
1 - open and block the door
2 - delicately clean the inner par using a damp soft cloth suitable for cleaning the
parts that come into contact with foodstuffs
3 - use neutral detergents or soap and water
4 - change the cloth often
5 - close the door
6 - clean the external wall of the door using neutral detergents or soap and water.
36
(Rif. 20)
05060130 00 26/04/2012