Arneg H216 Mode D'emploi page 28

Wengen
English
DO NOT remove protections or panels that require the use of tools to be
removed. In particular, do not remove the cover of the electrical panel; these
operations must always be performed by specialized technicians.
DO NOT obstruct the air inlet passages.
DO NOT walk on the roof of the cabinet.
DO NOT climb for any reason with your feet on the front of the cabinet, if
necessary, use a specific ladder. Danger: falls and serious injuries.
Prevent solar irradiation from hitting directly on the goods displayed. Danger:
alteration of the goods.
Limit the temperature of the irradiating surfaces that are present in the sales
area, for example, by insulating the ceilings.
DO NOT use spotlights with incandescence lamps aimed directly on the
cabinet. Danger: overheating of the goods
DO NOTN introduce explosive substances (e.g. spray cans) with inflammable
propellant into the cabinet
IN CASE OF A GAS LEAK OR FIRE OUTBREAK
Do not station with your head in the compartment where the cabinet is
positioned if it is not appropriately ventilated. Disconnect the cabinet by
acting on the main switch upstream of the device.
DO NOT USE WATER TO EXTINGUISH THE FLAMES, BUT DRY
EXTINGUISHERS ONLY.
ANY OTHER USE NOT EXPLICITLY POINTED OUT IN THIS MANUAL MUST BE
CONSIDERED DANGEROUS. THE MANUFACTURER CANNOT BE DEEMED
RESPONSIBLE FOR POSSIBLE DAMAGES STEMMING FROM AN IMPROPER,
INCORRECT, AND UNREASONABLE USE.
USEFUL NUMBERS:
SWITCHBOARD +39 0499699333 - FAX +39 9699444 - CALL CENTER 848 800225
3. Purpose of the manual/Field of application - Subjects concerned
This instructions manual contains the description of the line of refrigerated
cabinetsWengen manufactured by ARNEG Spa.
The information that follow have the purpose of providing indications with regards to:
use of the cabinet
technical characteristics
installation and assembly
information for the personnel appointed to its use
maintenance interventions
safety indications
The manual must be considered a part of the cabinet and must be stored during
its entire lifetime.
The manufacturer deems itself absolved of any responsibility in the following
cases:
improper use of the cabinet
incorrect installation not performed in accordance to the norms indicated
defects in the electrical power supply
serious deficiencies in the foreseen maintenance
unauthorized modifications and interventions
use of non-original spare parts
partial or total inobservance of the instructions.
The manual must be stored by a person chosen for the purpose in a suitable place
known to all the operators and to the personnel appointed to maintenance, for it to be
consulted at any time.
In case of transfer to third parties, it must be handed over to the new user or owner,
providing due and prompt communication thereof to the supplier. In case of damage or
loss, request a copy from the supplier.
The present manual addresses the following subjects:
28 05060130 00 26/04/2012