Mounting Steps - Lenze ECS Série Instructions De Montage

3.2.2

Mounting steps

How to install the axis module:
1. Prepare the fixing holes on the mounting surface.
–
Use the drilling jig for this purpose.
2. Take the fixing rails from the accessory kit in the cardboard box.
3. Push the rails into the slots of the heatsink:
–
From above: Push in the long side.
–
From below: Push in the short side.
4. Attach the axis module to the mounting surface.
EDKCSEX064 DE/EN/FR 4.0
Mechanical installation
Mounting with fixing rails (standard installation)
l
Mounting steps
3
93