Technical Data - Reely 1277092 Notice D'emploi

13.

Technical Data

Scale .....................................................1:10
Suitable drive battery ............................2-cell LiPo driving battery (rated voltage 7.4 V) in hardcase build
Suitable motor/speed controller ............Matching 1:10 onroad vehicles, designed for the above battery types
Suitable steering servo .........................Highspeed servo in standard size (approx. 20.5 x 40.5 mm)
Required Remote Control System ........2 channels
Drive .....................................................Four wheel drive via toothed belt
Chassis .................................................Single-wheel suspension, double transverse link
Dimensions (L x W x H) ........................365 x 207 x 70 mm (without car body)
Tyre dimensions (W x Ø) ......................27 x 63 mm
Wheel base ...........................................260 mm
Ground clearance .................................10 mm
Weight ..................................................640 g (without motor, speed controller, steering servo, receiver, drive battery,
Low deviations in dimensions and weight are due to production technical reasons.
(6-cell NiMH rechargeable battery with a rated voltage of 7.2 V is possible as
well, but you need to build a suitable battery holder yourself)
Rear axle with stiff axle (without differential)
Front axle with freewheel (for reversing) or stiff drive (for driving forward)
Completely with ball bearings
Oil pressure shock absorber with spiral springs, adjustable
Wheel alignment of the front wheels can be set
Front and rear axle camber can be set
Mechanical lowering possible
Stabilisers at the front and rear axles (not pre-installed but contained separa-
tely in the scope of delivery)
car body)
53