Maico WR 310 Notice De Mise En Service Et D'entretien page 66

UK | 6 Settings main menu
Room sensor configuration
Factory setting
Comfort control unit (touchscreen control
unit)
ModBus (only in commissioning software
and web server)
Simple control unit
Simple control unit blocking Off
Switching contact function
Bypass
PTC heat register
Heat exchanger type
Date, time
Parameter
Date
Time
Key lock
Parameter
Key lock
Function with activated key lock:
If there is no input on a main control unit for
2 minutes, the input lock activates. To cancel
the lock, press the touchscreen for 3 seconds.
Interlock for control units (simple control
units)
Simple control units can be locked from a
main control unit. All simple control units
are then deactivated.
Parameter
Interlock for
control units
66
Setting
DD.MM.YYYY
hh:mm
Setting
Inactive: Lock off
active: Lock on
Setting
Inactive: All simple
control units
are enabled
active: All simple con-
trol units
are deactivated
Status display
The Summer bypass open, Frost pro-
i
tection active or Supplementary heat-
ing on status displays appear when the
relevant function is switched on
 Chapter 5.1.
Parameter
Status display
(symbol display)
Language
Parameter
Language
Room sensor configuration
Parameter
Room sensor
configuration
The temperature determined with the selected
room sensor is used as the room temperature
to control the bypass and any supplementary
heating connected.
Factory setting
Parameter
Factory setting
Reset customer level: Owner and tenant set-
tings are reset to the factory setting. Installer
settings at installer level are retained.
Reset customer & installer level:
Factory setting is restored (complete reset).
Setting
no: Display off
yes: Display on
Setting
D, GB, F, I
Setting
Control unit (comfort
control unit), external,
internal, bus
Setting
Reset
customer level
Reset customer &
installer level