4. The display switches to WEEKDAY.
If there are no changes desired in this level TIME/DATE SETTINGS. In order to adjust
the weekdays use the buttons
enter button ↵".
Press NEXT to confirm.
5. The display switches to the beginning of TIME/DATE SETTINGS.
8.5
Configuration operation
The following information can be input in the configuration level:
•
Language selection
•
Selection whether the equipment should enable Biocide dosing
(only possible with model nos. 255155 and 255166)
The program steps and display texts listed in the following sections of this chapter are
NOTE
summarized in the overview ‚programming structure' in the appendix.
8.5.1
Overview
Fig. 8.34
8.5.2
Language Setting
Fig. 8.35
The menu point BIOCIDE METERING does not exist in type: 255159
The following steps must be taken to set the language:
10.
Activate the menu MESSAGE LANGUAGE in the program structure.
11.
Scroll using the buttons
12.
Confirm the selection with NEXT and select the menu BIOCIDE METERING.
13.
Change back to CONFIGURATION FUNCTIONS using the NEXT button.
417101555_CoolProtect.doc
or
to select the corresponding day and set with the
or
until the desired language is displayed.
- 70 -
see chapter
8.5.2
see chapter
8.5.3
(only valid for type: 255159)
Rev.: 08-06/10