8.5.3
Selection of possible Biocide metering controls
Fig. 8.36
Biocide metering is NOT available for article no. 255159!
Set whether the equipment should work with or without Biocide control. The input
influences the representation of the parameter menu. The setting „ON" activates the setting
for biocide metering in the parameter menu.
The following steps must be taken to select Biocide metering:
14.
Activate the OPERATOR LANGUAGE menu in the program structure.
15.
Select the BIOCIDE METERING menu using the NEXT button.
16.
Select the desired setting (ON/OFF) using the buttons
17.
Confirm the selection and switch back to the CONFIGUATION FUNCTIONS
with the NEXT button.
417101555_CoolProtect.doc
- 71 -
or
.
Rev.: 08-06/10