8.4
Parameter Operation
In the parameter-level it is possible to:
• enter the MEASUREMENT PARAMETERs
• execute the calibration of the measuring cell
• adjust the parameters for the bleeding
• adjust two biocide products, if necessary
• execute the alarm settings
• execute the day, time, date settings
The program steps and display texts following the sections of this chapter, are
NOTE
summarized in the overview „Programming Structure" in chapter 7.2.
8.4.1
Overview
Fig. 8.12
417101555_CoolProtect.doc
- 58 -
see chapter
8.4.2
see chapter
8.4.3
see chapter
8.4.4
see chapter
8.4.5
see chapter
8.4.6
see chapter
8.4.7
Rev.: 08-06/10