Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8.3.3.4 Deactivate access code (if it was activated prior)
Fig. 8.10 Overview
1.
Access into the entry functions is to be carried out as in chapter: 8.3.3.1.
2.
The display shows: DEACTIVATE ACCESS CODE
Activate code request by pressing „Enter-Key ↵". INPUT CODE
3.
Enter the first of the four code numbers by pressing one of this
Next press the enter key ↵. Then the second field will flash.
The following keys are to be entered analogously.
4.
Press the NEXT-Key to confirm.
5.
If the entered code is wrong, the display shows WRONG CODE NUMBER.
This display is confirmed by pressing the NEXT-Key and leads back to the
display DEACTIVATE ACCESS CODE. If the right access code was entered the
display shows ACTIVATE ACCESS CODE.
6.
Pressing the „NEXT-Key" leads to the function CHANGE ACCESS CODE.
7.
Pressing the „NEXT-Key" one more time leads back to the ACCESS CODE
FUNCTIONS.
417101555_CoolProtect.doc
- 56 -
or
this key.
Rev.: 08-06/10
Publicité
Table des Matières
