Night Cycle - Tecno-gaz EUROPA B 24 Mode D'emploi

PAR. 14

NIGHT CYCLE

The autoclave is fitted with a special economy system that stops the heating after 60 minutes of inactivity
(STAND BY).
This device makes it possible to carry out sterilisation cycles even in the absence of the operator, because
once the cycle has finished the autoclave automatically switches off after an hour.
All the Leds go off and only the ON/OFF main switch light and the Display stay on.
To check that sterilisation has taken place, the operator must press START/STOP.
If the Display indicates CYCLE END it means that the sterilisation has taken place; if an alarm or error
message is displayed, see PAR.16 that indicates the various faults that can occur.
44