Standard Fittings; Control Panel Buttons And Displays - Tecno-gaz EUROPA B 24 Mode D'emploi

PAR. 4

STANDARD FITTINGS

The following standard fittings are included in price
and supplied with the unit in the same packing.
Q.TY
1 Tray extraction and door adjusting key
4+4 Trays
1 Instruments holder
1 Funnel
1 Tank outlet hose
1 Rilsan inlet hose
1 Sponge
1 Tray holder
THE ABOVE-LISTED FITTINGS DO NOT
REQUIRE SPECIAL INSTRUCTIONS
NOTE: PLEASE REFER TO THIS TABLE WHEN USING THE MANUAL.
DESCRIPTION
PAR. 5

CONTROL PANEL BUTTONS AND DISPLAYS

Captions shown on the table refer to the cover
phtographs.
1A ON/OFF Main switch
2A START/STOP Push-button
3A SELECT button (Cycle selection)
4A TECHNICAL button
5A DOOR opening button
6A Led MIN
7A Led MAX
8A Led EXHAUST
9A Led Vacuum Test
10A Led cycle FLASH – BOWIE&DICK –
HELIX
11A Led Cycle 121° C SOLIDS
12A Led Cycle 121° C HOLLOW
13A Led Cycle 134° C SOLIDS
14A Led Cycle 134° C HOLLOW
15A Led PRION Cycle
16A Led 121° C POROUS (porous material)
17A Display
18A Printer
19A Incubator On/Off switch
20A Adjustment feet
21A Autoclave door
22A Door opening handle
23A Biological Incubator
24A Tank cover
30