Connection And Initial Operation - Lenz Digital plus LH01 Mode D'emploi

10
5

Connection and initial operation

The LH01 can be used with the command stations LZ100 or LZV100.
The LH01 requires the software version 3.6 for the
command station LZ100/LZV100.
Update your command station, if necessary.
Insert the Western plug of the enclosed connecting cable
1.
into the socket of the LH01.
Insert the five-pole DIN plug into the five-pole DIN socket
2.
at the back of the LZ100/LZV100.
Information LH01