List Of Error Messages - Lenz Digital plus LH01 Mode D'emploi

58

14.2 List of error messages

Error Error:
ER01 Programming information: short circuit
ER02 Programming information: no information
ER06 Value outside permissible range
ER07 Command station ready
ER24 DTR/MTR: Locomotive not called up or locomotive address 0
ER25 DTR/MTR: Locomotive called up by another device
ER26 DTR/MTR: Locomotive part of another DTR/MTR
ER27 DTR/MTR: Locomotive speed not 0
ER28 DTR/MTR: Locomotive not part of multiple traction
ER29 DTR/MTR: Locomotive address no multiple traction basic address
ER30 Locomotive cannot be deleted from memory
ER31 Central memory full
ER40 Flash cannot be deleted
ER41 Time-out
ER42 Command station incompatible
ER43 Software incompatible
ER44 Speed step not supported
ER45 Error in locomotive stack
ER80 Transmission error
ER97 Error in data processing at command station LZ100/LZV100
Command sent to command station by manual control not part of
ER98
command range
ER99 General system error
Information LH01