Enabling/Disabling The Displaying Of Function Acronyms - Lenz Digital plus LH01 Mode D'emploi

56
13.11 Enabling/Disabling the displaying of function
acronyms
Function acronyms can only be displayed if you have
assigned acronyms to locomotives functions (p. 24).
Ex-factory, the displaying of acronyms is enabled.
Action
'EIN':
'AUS':
Display
Proceed from 'Locomotive control' (address
or speed step are displayed)...
... press the bottom of the rotary knob until
the LED at the bottom shines.
'SYS' is displayed, followed by the first sub
menu of the system settings.
Select 'ALIA' ...
... and press the bottom of the rotary knob.
Release the rotary knob to display the
currently set status.
Function acronyms are displayed.
Function acronyms are not displayed.
Turn to select the desired status...
... press the centre of the rotary knob to
confirm
'Locomotive control'.
Information LH01
Explanation
your selection and return to