Reading Cvs Via Pom And The Address Display Lrc120 - Lenz Digital plus LH01 Mode D'emploi

36
12.1 Reading CVs via PoM and the address display
LRC120
It is possible to read CV values via PoM during operation.
Requirements:

A RailCom-able locomotive decoder

The locomotive is located in a track section monitored by the
address display LRC120.

RailCom transmission is enabled in the decoder.
Information on how to connect the address display LRC120 as well as
the settings of RailCom-able locomotive decoders can be found in the
corresponding operating manuals.
Action Display
Select the address of the locomotive whose
CVs (settings) you would like to read
(p. 15).
Press the right side of the rotary knob until
the LED to the right shines.
Release the rotary knob to display the
locomotive
locomotive address 1.
Click right until 'OPT' is displayed.
Turn the rotary knob until 'PoM' is displayed.
Press right. Now indicate which CV you
would like to read or change.
Information LH01
Explanation
address used last. Here: