Controlling Locomotives; Changing The Speed Step - Lenz Digital plus LH01 Mode D'emploi

7

Controlling locomotives

7.1

Changing the speed step

During the first operation, the LH01 uses locomotive address 3 which
is shown in the display.
Turn the rotary knob to change the speed step for this locomotive
address:
Action Display
Turn the rotary knob one 'click' to the right or
left to display the current speed step of the
locomotive.
A turn clockwise will increase the speed step.
A turn counter clockwise will decrease the
speed step ...
... down to a standstill.
Explanation
13