Displaying The Hardware Id - Lenz Digital plus LH01 Mode D'emploi

54

13.9 Displaying the hardware ID

Action Display
Proceed from 'Locomotive control' (address
or speed step are displayed)...
... press the bottom of the rotary knob until
the LED at the bottom shines.
'SYS' is displayed, followed by the first sub
menu of the system settings.
Select 'HW.ID'.
Press the bottom of the rotary knob to display
the hardware ID of the LH01. Here: ID 0C29.
Release to display the system setting
'HW.ID'. Turn the rotary knob to select
another system setting or ...
... press 'Esc' to return to 'Locomotive
control'.
Information LH01
Explanation