Default Settings - Schiller AT-1 Mode D'emploi

Settings (cont.) Settings (cont.)
Settings (cont.) Settings (cont.) Settings (cont.)

Default Settings

To reset the unit to the basic default
settings, proceed as follows:
AL ALT - 0 - 6 - 6 AL AL T - 0 - 6 - 6 T - 0 - 6 - 6
AL T - 0 - 6 - 6 T - 0 - 6 - 6
SETTINGS S = STANDARD
LANGUAGE AS SET
LEADS STANDARD (S)
ECG: 25MM/S, SHORT (O)
AUTO FORMAT 1
PATIENT DATA FORM
ENABLED +
ECG: 25MM/S, LONG (OOO)
AUTO FORMAT 2
PATIENT DATA FORM
ENABLED +
RHYTHM LEADS
AUTOM.
ENABLED (+)
CENTERING
PAPER Z - FOLD
PRINTOUT OF
SEQUENTIAL
SIGNALS
BASELINE FILTER
0.05HZ
SETTING
MAINS FILTER
50HZ (60HZ)
SETTINGS
MYOGRAM
35HZ, OFF (-)
FILTER SETTING
INTERPRETATION
SETTINGS
ECG: 25MM/S, SHORT (O)
EXTERNAL
PRINTER
PATIENT DATA FORM
ENABLED +
C = WITH
M = MEASUREMENTS
INTERPRETATION
AS SET AS SET
STANDARD (S) STANDARD (S)
ECG : 25MM/S, SHORT (O) ECG : 25MM/S, SHORT (O)
M ECG :6*2 (50MM/S + 1) M ECG: 6*2 (50MM/S + 1)
MEASUREMENTS: MEASUREMENTS:
SUPRESSED (-) SUPRESSED (-)
MARKS: ENABLED (+) MARKS: ENABLED (+)
INTERPRETATION:
ENABLED (+)
ECG : 25MM/S, LONG ECG : 25MM/S, LONG
(OOO) (OOO)
M ECG: -- M ECG: NONE
MEASUREMENTS: MEASUREMENTS:
SUPRESSED (-) SUPRESSED (-)
MARKS: ENABLED (+) MARKS: ENABLED (+)
INTERPRETATION:
DISABLED (-)
V1, II V1, II
ENABLED (+) ENABLED (+)
Z - FOLD Z - FOLD
SEQUENTIAL SEQUENTIAL
0.05HZ 0.05HZ
50HZ (60HZ) 50HZ (60HZ)
35HZ, OFF (-) 35HZ, OFF (-)
N/A: SUPRESSED (-)
U: ENABLED (+)
A30: UNDER THIRTY (-)
S: LOW (-)
ECG : 25MM/S, SHORT (O) ECG : 25MM/S, SHORT (O)
M ECG: 6*2 (50MM/S) + 2 M ECG: 6*2 (50MM/S) + 2
MEASUREMENTS: MEASUREMENTS:
SUPRESSED (-) SUPRESSED (-)
MARKS: ENABLED (+) MARKS: ENABLED (+)
INTERPRETATION:
ENABLED (+)
AT-1 User Guide Art. No. 2.510171 g
17