Baseline Filter; Mains Filter; Myogram Filter - Schiller AT-1 Mode D'emploi

Settings (cont.) Settings (cont.) Settings (cont.)
Settings (cont.) Settings (cont.)
Leads Leads Leads Leads Leads
ECG Format ECG Format
ECG Format ECG Format ECG Format
M ECG M ECG M ECG
M ECG M ECG
Measurements Measurements Measurements Measurements Measurements
Marks Marks
Marks Marks Marks
Interpretation nterpretation nterpretation nterpretation
nterpretation
Selected Rhythm leads Selected Rhythm leads Selected Rhythm leads Selected Rhythm leads Selected Rhythm leads
Automatic Centering Automatic Centering Automatic Centering Automatic Centering Automatic Centering
Paper type Paper type
Paper type Paper type Paper type
Printout of signals Printout of signals Printout of signals
Printout of signals Printout of signals

Baseline Filter

Baseline Filter Baseline Filter Baseline Filter Baseline Filter

Mains Filter

Mains Filter Mains Filter Mains Filter Mains Filter

Myogram Filter

Myogram Filter
Myogram Filter Myogram Filter Myogram Filter
Interpretation settings: Interpretation settings: Interpretation settings:
Interpretation settings: Interpretation settings:
16
Standard (S) or Cabrera (C)
Long (ooo), Short (o) or Suppressed (-)
Average cycles as defined in auto ECG recording setup (e.g. 4 *
3 (25 mm/s) + 2)
Enabled (+) or Suppressed (-)
Enabled (+) or Suppressed (-)
Enabled (+) or Suppressed (-)
Leads selected for R1 and R2
Enabled (+) or Suppressed (-)
Z-folded
Sequential or Simultaneous
0.05, 0.15 or 0.30 Hz
50, 60 Hz or OFF (-)
25 or 35 Hz, ON (+) or OFF (-)
N/A:+/- 'normal/abnormal' is written (+) or suppressed (-)
U:+/- 'unconfirmed report' is written (+) or suppressed (-)
A30:+/- patient age is assumed to be < 30 (-) or >30 (+)
S: +/- low (-) or high (+) sensitivity