Schiller AT-1 Mode D'emploi page 42

Automatic Mode (ECG) Settings, Internal Printer (cont.) Automatic Mode (ECG) Settings, Internal Printer (cont.)
Automatic Mode (ECG) Settings, Internal Printer (cont.) Automatic Mode (ECG) Settings, Internal Printer (cont.) Automatic Mode (ECG) Settings, Internal Printer (cont.)
Measurements and Markings (M and C versions only)
To define the measurements and markings proceed as follows:
ALT
28
Measurements (M and C Options Only) Internal printer
Entry Key Sequence
omitted - however, the values of electrical
5
6
1 or 2 3
7
Reference markings (beginning and end of
8
Printout
Detailed table of measurement results
axes, intervals, and heart rate are not
suppressed.
Detailed table of measurement results is
printed
Reference markings are omitted
P wave and QRS, and end of T wave)
are added to the ECG average cycles
Confirm
Press STOP
key