Average Cycles - Schiller AT-1 Mode D'emploi

Automatic Mode (ECG) Settings, Internal Printer Automatic Mode (ECG) Settings, Internal Printer Automatic Mode (ECG) Settings, Internal Printer
Automatic Mode (ECG) Settings, Internal Printer Automatic Mode (ECG) Settings, Internal Printer

Average Cycles

The Average cycles are defined as follows:
Note: Lead selection for the rhythm lead(s) is defined on page 35
Average Cycles (interpretation option only) Internal printer
Entry Key Sequence
5 No average lead cycles are printed
6 complexes are printed in 4 groups of
three leads at a chart speed of 25mm/s
7 complexes are printed in 4 groups of
three leads at a chart speed of 50mm/s
ALT 1 or 2 2
6 x 2 (50 mm/s) + 1 rhythm lead
(25mm/s). The average complexes are
8
printed in 6 groups of two leads at a
12 x 1 (25 mm/s) + 2 rhythm leads
(25mm/s). The average complexes are
9
printed out for all 12 leads at a chart
Printout
4 x 3 (25 mm/s). The average
Press STOP
4 x 3 (50 mm/s). The average
chart speed of 50mm/s
speed of 50mm/s
Confirm
key
AT-1 User Guide Art. No. 2.510171 g
27