Manual Mode - Schiller AT-1 Mode D'emploi

Manual Mode

Manual Mode Manual Mode
Manual Mode Manual Mode
Manual mode Manual mode
Manual mode Manual mode Manual mode provides a real-time ECG printout of 3 selected leads with full control of parameter
selection. This is only possible on the internal thermal printer.
To start the manual recording of a real-time ECG, press the MAN START Printout key
To stop the manual recording (printout) press the STOP key
The printout provides you with the following:
• Three (selected) leads with lead identification.
• On the lower edge, the chart speed and filter settings (if on).
• At the top, the heart rate as current average of 4 beats, trace sensitivity.
The following can be freely chosen during or before the recording:
Lead Group
8
by means of the LEAD FORWARD
and LEAD BACKWARD key