Automatic Mode (Ecg) Settings, Internal Printer - Schiller AT-1 Mode D'emploi

Automatic Mode (ECG) Settings, Internal Printer

Automatic Mode (ECG) Settings, Internal Printer Automatic Mode (ECG) Settings, Internal Printer Automatic Mode (ECG) Settings, Internal Printer Automatic Mode (ECG) Settings, Internal Printer
Two separate Auto formats can be defined for the internal printer in the AT-1/AT-1smartprint.
When defining auto format 1 the key sequence
precedes the setting. When defining auto format 2 the key sequence
precedes the setting.
The automatic mode formats are detailed on the following pages. The ECG format is set as
follows:
Entry Key Sequence
ALT
26
ECG Format Internal Printer
5
6 Leads are printed in short form (3 sheets)
7 Leads are printed in long form (6 sheets)
1 or 2 1
8
9
AL ALT - 1 AL AL AL T - 1 T - 1 T - 1 T - 1
AL AL AL ALT - 2 T - 2 T - 2
AL T - 2 T - 2
Printout
No leads printed
Chart Speed 25mm/s
Chart Speed 50mm/s
Confirm
Press STOP key