Schiller AT-1 Mode D'emploi page 39

Settings (cont.) Settings (cont.) Settings (cont.)
Settings (cont.) Settings (cont.)
Note: If the battery has been disconnected for more than half an hour, the clock oscillator
must be restarted before setting the time. To do this the following key sequence
must be pressed:
This will start the oscillator and the time can be set.
Note: The time and date only appear on the AUTO printout from the external printer.
AL ALT - 0 - 5 - 9 AL AL AL T - 0 - 5 - 9 T - 0 - 5 - 9 T - 0 - 5 - 9 T - 0 - 5 - 9
AT-1 User Guide Art. No. 2.510171 g
25