General Settings - Schiller AT-2 Guide De L'utilisateur

General Settings

Each parameter is set by means of a code. This code comprises a combination starting with
the ALT key followed by a number of keys and is always confirmed with the STOP key. As
soon as the ALT key is pressed, the keyboard is dedicated to the programming function.
The setting is remembered and the keyboard is only released for other functions when the
STOP key is pressed. Once the settings have been confirmed, they are stored in the memory
even when the unit is switched off. As an example, if you want to set the language on your
AT-2 to English, proceed as follows:
ALT
Start programming /
Switch to numerical keyboard
On the following pages the programmable parameters and the programming sequences are
described in detail.
NOTE THAT THE SETTINGS ARE ALWAYS CONFIRMED BY PRESSING THE
CARDIOVIT AT-2
8.2001
0 2
25
FILT
mm/s mm/s
Key 0 Key 2
Program sequence
2
25
STOP
Key 2
CONFIRM SETTING
STOP
KEY.
Page 11