Measurements And Markings - Schiller AT-2 Guide De L'utilisateur

Settings for Automatic Mode

Measurements and Markings

To define the measurements and markings proceed as follows:
Entry Key Sequence
1
ALT or
2
Confirm the selection by pressing STOP.
Page 24
Measurements and Markings (Interpretation Option only)
Detailed table of measurement results is omitted
5 (However, the values of electrical axes, intervals, and
heart rate are not suppressed.).
6 Detailed table of measurement results is printed.
3
Reference markings (beginning and end of P wave and
7
QRS as well as end of T wave) are omitted.
Reference markings (beginning and end of P wave and
8
QRS as well as end of T wave) are added to ECG cycles.
Output Format Confirm
Press
STOP
Key
CARDIOVIT AT-2
8.2001