Acoustic Qrs Indication - Schiller AT-2 Guide De L'utilisateur

General Settings
The selectable printout forms are:
Simultaneous
Sequential
Auto-Centering ON
Auto-Centering OFF

Acoustic QRS Indication

The acoustic QRS indication can be switched on or off at any time by pressing the
key.
Page 20
All ECG leads are printed in the same time segment (in
automatic mode only).
Each group is a contiguous time segment of approximately 2.5
or 5 seconds (in automatic mode only).
All ECG traces are centred dynamically for optimal use of
paper width.
ECG traces are set to a fixed baseline position and may
possibly overlap.
QRS
BEEP
CARDIOVIT AT-2
8.2001