Care & Maintenance; Care Of Your Cardiovit At-2; Self-Test - Schiller AT-2 Guide De L'utilisateur

Care & Maintenance

Care of your CARDIOVIT AT-2

The patient cable should not be exposed to excessive mechanical stress. Whenever
disconnecting the leads, hold the plugs and not the cables. Align the leads in such a way as
to prevent anyone stumbling over them or any damage caused by the wheels of instrument
trolleys. The cable can be wiped with soapy water. Sterilization, if required, should be done
with gas only and not with steam. To disinfect, wipe the cable with any standard hospital
disinfectant.
The casing of the CARDIOVIT AT-2 should be cleaned with a soft cloth on the surface only.
DISCONNECT THE UNIT BEFORE CLEANING.DO NOT, UNDER ANY CIRCUMSTANCES,
IMMERSE THE APPARATUS INTO A CLEANING LIQUID OR STERILIZE WITH HOT
WATER, STEAM, OR AIR.

Self-test

Initiate a self-test of the AT-2 as follows:
A table giving information for the service staff is printed out.
CARDIOVIT AT-2
8.2001
Initiate Self-Test
Entry Key Sequence
ALT 0 3 3
Action
Printout of Self-test
Page 35