Settings For Automatic Mode - Schiller AT-2 Guide De L'utilisateur

Settings for Automatic Mode

Two separate formats for the automatic ECG output can be selected as follows:
With this the 2 automatic mode formats are defined as detailed on the following pages.
The ECG format is set as follows:
Entry Key Sequence
1
ALT or
2
Confirm the selection by pressing STOP.
Note: Lead selection for the rhythm lead is defined on page 27.
Page 22
Automatic ECG Format
Entry Key
Sequence
1 Setup Format 1
ALT
2 Setup Format 2
ECG Format
5
6 Leads are printed in short form (1 sheet)
7 Leads are printed in long form (2 sheets)
1
8
9
0 Leads are printed in format 4 x 3 + 1 Rhy
Setup Format
Output Format
No leads are printed
Chart speed is 25 mm/s
Chart speed is 50 mm/s
Confirm
Press
STOP
Key
CARDIOVIT AT-2
8.2001