Installing With Uas System - Harmony DEFENDER 360 Manuel D'instructions

! WARNING: CONSULT YOUR VEHICLE OWNER'S
MANUAL FOR THE EXACT PLACEMENT OF THESE
ELEMENTS IN YOUR VEHICLE, AND FOR MAXIMUM
UAS WEIGHT ALLOWANCES PRIOR TO INSTALLATION
AS SOME MANUFACTURERS HAVE LOWER MAXIMUM
WEIGHT ALLOWANCES FOR UAS USAGE.

INSTALLING WITH UAS SYSTEM

1. Unhook UAS from storage loops.
For ease of installation, extend
UAS to its maximum length. Ensure
the UAS strap is NOT twisted and
that the UAS connectors are facing
down ❶.
2. Place the child restraint flush
against a forward-facing vehicle
seat, centered between the UAS
anchors. Adjust the recline as
necessary (see "Recline").
3. Fasten UAS hooks to vehicle lower
anchors ensuring the hooks are
facing downwards ❷. Pull firmly
to be sure that they are attached.
BELT MUST LAY FLAT AND NOT BE
TWISTED.
4. Tighten UAS by placing your knee
on the child restraint base and
by using your full weight to push
the child restraint down as you
simultaneously pull upwards on
the free end of the adjustment
belt ❸.
TIP: If you are not able to tighten
UAS using the method above,
try pulling the UAS strap up
through the belt path (under
the fabric) ❹, then tighten.
❹
❶
❷
❸
28