Using Child Restraint In Booster Mode; (Without Internal Harness); Removing/Installing Harness - Harmony DEFENDER 360 Manuel D'instructions

USING CHILD RESTRAINT IN BOOSTER MODE

(WITHOUT INTERNAL HARNESS)

REMOVING/INSTALLING HARNESS

! WARNING: The BASE seat cover can be removed
without removing the harness.
1. Open chest clip and harness buckle.
2. Face the rear of the child restraint and remove the
harness straps from the splitter plate ❶.
3. Pull shoulder straps out of their respective slots in the
backrest ❷.
4. Lie child restraint on its side and find the metal locking
plate for each harness strap on
the underside of the base of the
child restraint. Place a screwdriver
under the loop of the strap and
pry up to unlock the metal locking
plate from the plastic base ❸.
Turn each metal plate so that it
can slide up and out through the
plastic seat base.
5. Repeat procedure for top tether
removal.
6. Store complete harness system for
future use.
7. Store crotch buckle under fabric
seat cover in the indentation in
the plastic seat base ❹.
❶
❷
❸
❹
❺
36