Removing/Installing Fabric Seat Cover - Harmony DEFENDER 360 Manuel D'instructions

REMOVING/INSTALLING FABRIC SEAT COVER

TO REMOVE
See "Removing/Installing harness".
THE HARNESS DOES NOT NEED TO BE REMOVED IN
ORDER TO REMOVE THE HEAD AND BASE FABRIC
COVERS.
HEADREST:
1. Gently slide fabric downwards off the top of the
headrest.
2. Unhook the elastic loops from each headrest shoulder
belt guide opening on the bottom of the headrest.
BACKREST:
1. Undo the fabric hook-and-
loop fastener tabs (x2) ❶
along the bottom sides of
the backrest (where the
backrest meets the base).
2. Gently slide fabric cover
off the backrest.
3. Remove EPE foam from
backrest fabric.
BASE:
1. Undo the fabric hook-and-loop fastener tabs (x4)
❷❸ as indicated.
2. Gently slide the fabric cover off the plastic base from
the back of the child restraint towards the front of the
seat. Make sure that recline knob does not get caught
on fabric as you remove seat cover.
TO INSTALL
To reinstall fabric covers, repeat previous steps in
reverse order.
TIP: For ease of fabric cover installations, turn recline
knob counterclockwise to open gap at base of
❶
❷
❸
❶
❷
❸
46