8. Pull
the
adjustment strap as far as it will
go. This will lock the splitter plate
into the base of the seat ❺.
9. Roll strap tightly, secure roll with
an elastic band and store rolled
strap under the fabric seat cover
in the opening of the up-front
adjuster.
To reinstall, remove backrest plate and repeat these
steps in reverse order. When re-inserting the shoulder
straps through the backrest, ensure the straps are
ABOVE the metal bars inside the slots in the backrest
❻. Reinstall backrest plate once harness is properly
reinstalled.
PREPARING BOOSTER SEAT FOR USE
INCORRECT USE OF THE VEHICLE'S 3-POINT
LAP-AND-SHOULDER SEAT BELT SYSTEM IS THE
MOST COMMON MISTAKE PEOPLE MAKE. IT IS
VERY IMPORTANT TO READ, UNDERSTAND AND
FOLLOW ALL INSTRUCTIONS AND WARNINGS.
DO NOT MISTAKE COMFORT FOR SAFETY. THE
VEHICLE'S 3-POINT LAP-AND-SHOULDER SEAT
BELT MUST BE SNUGLY ADJUSTED AT ALL TIMES.
!
ENSURE the vehicle shoulder belt's
position is correct for your child's
size. VERIFY OFTEN.
!
WARNING: DO NOT use this booster
seat if the midpoint of your child's
head is above the top of the booster
seat headrest at its maximum height.
37
up-front
WARNING!
!
harness
❻