Installing Child Restraint In Harness Mode: Uas Or Vehicle Seat Belt; Uas (Universal Anchorage System) - Harmony DEFENDER 360 Manuel D'instructions

INSTALLING CHILD RESTRAINT IN HARNESS MODE:
You can install the child restraint using EITHER the UAS
or vehicle seat belt.
UAS: The lower Universal Anchorage System (UAS) is
used for installing the child restraint WITHOUT using
the vehicle seat belts.
! The UAS can ONLY be used if your vehicle has the
UAS anchors installed and designated UAS seating
positions. Check your vehicle owner's manual to see
which seating positions may be equipped with UAS.
Vehicle Seat Belts: If UAS is not an option, you MUST
use the vehicle's lap-only or lap-and-shoulder belt to
install the child restraint in your vehicle.

UAS (UNIVERSAL ANCHORAGE SYSTEM)

If your vehicle is equipped with UAS, the
vehicle UAS anchorage points may be visible
at the seat crease. If not visible, they may be
marked with this symbol.
Check your vehicle owner's manual for your vehicle's
exact UAS locations, anchor identifications and usage
requirements for use with a child restraint.
! Use vehicle belt (NOT UAS connectors) for installations
with children weighing more than 22.68 kg (50
pounds).
Top Tether
anchors points
Vehicle
seat crease
27
UAS OR VEHICLE SEAT BELT
UAS
anchor
points