Certifications - Harmony DEFENDER 360 Manuel D'instructions

! DO NOT use this child restraint if it can't be properly
installed. It is possible that your vehicle has no suitable
seating position for this child restraint due to seat belt
type, airbag system and/or lack of location of a tether
strap anchor. Read and follow these instructions, and
your vehicle owner's manual carefully.
! NEVER attach two UAS lower connectors to the same
anchor point.
This child restraint conforms to the Canadian Motor
Vehicle Safety Standards (CMVSS) 213 and 213.2 and
IS CERTIFIED for use in the following classes of vehicles
ONLY: multi-purpose passenger vehicles, passenger cars,
and trucks. Harmony Juvenile Products has also validated
compliance through independent laboratory testing.
WHEN USED WITH HARNESS SYSTEM: This child
restraint conforms to Canada Motor Vehicle Safety
Standards (CMVSS) 213 and IS CERTIFIED for use in
passenger motor vehicles and aircraft.
WHEN USED WITHOUT HARNESS SYSTEM: This
child restraint (booster seat) conforms to Canada
Motor Vehicle Safety Standards (CMVSS) 213.2 and IS
CERTIFIED for use in passenger motor vehicles only.
This child restraint is NOT CERTIFIED for aircraft use
when used as a booster WITHOUT the harness.
!
Only suitable for use in the listed vehicles fitted with
3-point with retractor safety-belts.
This child restraint must NOT be used in homes, boats,
buses, motorcycles, motor homes, or any other vehicles
that have non-forward-facing seats, missing seat belts,
or whose seat belts do not meet the requirements of
this child restraint.
This child restraint is compatible with vehicle child
restraint Universal Anchorage Systems (UAS).
11

CERTIFICATIONS