Installing With Uas System - Harmony BIG BOOST DELUXE Manuel D'instructions

Check your vehicle owner's manual for your vehicle's
exact UAS locations, anchor identifications and usage
requirements for use with a booster seat.
Vehicle seat
crease

INSTALLING WITH UAS SYSTEM

INSTALLING THIS BOOSTER SEAT USING UAS DOES
NOT SECURE THE CHILD. THE VEHICLE'S 3-POINT
LAP-AND-SHOULDER BELT MUST BE USED TO
SECURE THE CHILD IN THE BOOSTER SEAT.
You must remove the cup holder before using/adjusting
the UAS belt system.
1. Loosen UAS by pressing upwards
on the UAS release button found
directly
adjuster strap while sliding the
UAS clips out from storage area
❶. For ease of installation,
extend UAS to its maximum
length. Ensure the UAS straps are
NOT twisted and that the UAS
connectors are facing down.
2. Place the booster seat flush against a forward-facing
vehicle seat, CENTERED between the UAS anchors.
17
WARNING!
!
under the up-front
UAS
anchor
points
❶