Installation - Harmony BIG BOOST DELUXE Manuel D'instructions

the child's stomach as this can cause major injuries to
the child in case of a sharp turn, sudden stop or crash.
! DO NOT allow the child to slouch, slide down in the
seat, or create slack in the belt system ❺. If child will
not keep vehicle belt properly positioned, DO NOT use
this booster seat.
! NEVER position vehicle lap-only belt over top of the
armrests ❻.
❹
! DO NOT use any load bearing contact points other
than those described in the instructions and marked in
the child restraint.
IF IN DOUBT ABOUT THESE POINTS OR ANY
QUESTIONS RELATED TO INSTALLATION, PLEASE
CONTACT HARMONY JUVENILE PRODUCTS.
DUE TO VARYING ANGLES OF VEHICLE SEAT BELT
RETRACTORS, EXCESS SLACK IN THE VEHICLE BELT
SYSTEM MIGHT NOT BE REMOVED AUTOMATICALLY.
Once the lap and shoulder portions of the seat belt
are properly positioned and the buckle is attached,
FEED ANY REMAINING SLACK OF THE SEAT BELT
MANUALLY BACK INTO THE RETRACTOR TO TIGHTEN
THE WHOLE SYSTEM.
1. Place booster seat firmly against the back of a
forward-facing vehicle seat. The vehicle seat MUST
be equipped with a 3-point lap-and-shoulder belt.

INSTALLATION

WARNING!
!
❺
❻
20