Installing Headrest (When Applicable) - Harmony DREAMTIME 2 Manuel D'instructions

INSTALLING HEADREST (WHEN APPLICABLE)

! WARNING: READ THE FOLLOWING INSTRUCTIONS
CAREFULLY. ONCE THE HEADREST IS INSERTED INTO
THE BACKREST, IT CANNOT BE REMOVED.
1. Identify both the headrest and backrest. Ensure that
BOTH the headrest and the backrest side impact
supports face you (both face the same direction).
2. Push the
Adjuster. While holding the button
pressed in, insert the rectangular
extension of the headrest into the
opening at the top of the backrest
as far as it will go ❶.
3. While holding the Headrest Height
Adjuster pressed in, push down
hard until the headrest is fully inserted. Press button
to lower the headrest to the desired position.
TIP #1: If you have difficulty inserting headrest, try
rocking headrest side to side as you push down
to insert one side, then the other.
TIP #2: If you are still having problems
inserting the headrest, follow
steps #1-2 above, then turn
the entire unit upside-down
and,
Height Adjuster pressed in,
force headrest into backrest
by pressing down against the
floor. Turn unit upright and
check if headrest is properly
inserted in backrest ❷.
Please call our Customer Service Department at
1-877-306-1001 if you are experiencing any difficulties.
Headrest
with the
Height
❶
❷
Headrest
14