Installing Cup Holder (When Applicable); Aircraft Installation; Instruction Manual Storage; Removing/Installing Fabric Seat Cover - Harmony DREAMTIME ELITE Manuel D'instructions

Masquer les pouces Voir aussi pour DREAMTIME ELITE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

!
ALWAYS be aware of what your children are doing in
the back seat.

INSTALLING CUP HOLDER (WHEN APPLICABLE)

TO INSTALL:
1. Slide cup holder into place over cup
holder clip ❶❷ on either side until
locked in place.
TO REMOVE:
1. Pull cup holder up and outward.
When not in use, the cup holder can be
stored in the cavity on the underside of
the booster seat base.
• To remove from storage, twist cup
holder while pulling to release.
This booster seat is NOT CERTIFIED for aircraft use. Aircraft
seats are not equipped with 3-point lap-and-shoulder
belts which are required for use with this booster seat.

INSTRUCTION MANUAL STORAGE

We recommend that you store your
instruction manual in the pocket provided
on the side of the booster seat.
When using the seat as a backless booster,
we recommend that you store your
instruction manual under the
fabric cover on the side of the
booster seat.

REMOVING/INSTALLING FABRIC SEAT COVER

Headrest: Unhook the left and right ELASTIC loops from
each shoulder belt guide ❶.
27

AIRCRAFT INSTALLATION

Publicité

Chapitres

Table des Matières
loading

Table des Matières