ASSEMBLING/DISASSEMBLING BACKREST
1. Insert 'U-Shape' plastic hooks on bottom of backrest
into the corresponding bars on seat base ❶. Apply a
small amount of force to gently lock the hooks onto
base ❷.
2. While holding fabric down at
rear of seat base, slowly swing
the backrest upwards, whereby
locking the backrest into place ❸.
The hook-and-loop portion of the
fabric at rear of seat should be
UNDER the backrest ❹.
3. Secure fabric ❺.
4. To remove backrest, repeat previous steps in reverse
order.
17
❶
❸
❷
❹
❺