Using Cup Holder (When Applicable); Care And Maintenance; Aircraft Use - Harmony DREAMTIME 2 Manuel D'instructions

USING CUP HOLDER (WHEN APPLICABLE)

The cup holder is stored in the base of the booster seat.
• To remove from storage, pull the cup
holder.
TO INSTALL:
1. Remove protective cap from the
desired side by lifting release tab on
protective cap and pulling cap off ❶.
Store protective cap for future use.
2. Slide cup holder into place over cup
holder clip ❷ until locked in place.
TO REMOVE:
1. Lift release tab on cup holder and pull
cup holder off cup holder clip. Replace
protective cap if desired.
CLEANING YOUR SEAT PAD:
• MACHINE WASH SEPARATELY using cold water -
delicate cycle.
• DO NOT BLEACH.
• DRIP DRY to prevent cover from shrinking.
CLEANING THE PLASTIC SHELL:
• SPONGE CLEAN using warm water and mild soap.
• TOWEL DRY.
• DO NOT use solvents, abrasive cleaners, or
disassemble booster seat in any way, except as
instructed.
This booster seat is NOT certified for aircraft use.
Aircraft seats are not equipped with 3-point lap-and-
shoulder belts which are required for use with this
booster seat.
25

CARE AND MAINTENANCE

AIRCRAFT USE

❶
❷