Entanglement With Shoulder Belt; Installing/Removing Shoulder Belt Guide - Harmony DREAMTIME 2 Manuel D'instructions

placement
pg. 24).

ENTANGLEMENT WITH SHOULDER BELT

! WARNING:
and choking with your vehicle's shoulder belts,
Harmony Juvenile Products recommends that the
following precautions are taken when installing your
booster seat:
1. Pull the shoulder portion of the vehicle seat belt all
the way out until the retractor locks.
2. SLOWLY let the seat belt retract until it is snug against
your child.
3. ENSURE that the seat belts do not press on the
child's flesh or push the child's body into an unnatural
position.
4. Do the same for all unused vehicle seat belts.
! Teach your child that seat belts are not toys and should
NEVER be played with, regardless of whether the car is
in motion or not.
! ALWAYS be aware of what your children are doing in
the back seat.
! OPENING OF RED BELT GUIDE CLIP MUST FACE
FORWARD.
TO INSTALL:
1. Insert plastic button into the end of the belt guide.
2. With LIGHT force, gently press the button into the
hole on the underside of the seat base.
TO REMOVE:
1. Remove vehicle seat belt from RED belt guide clip.
2. Gently pull upwards on belt and plastic button until
removed.
23
(see "Using
To avoid
INSTALLING/REMOVING
SHOULDER BELT GUIDE
shoulder
possible
belt guide",
entanglement