Using Shoulder Belt Guide; Removing/Installing Fabric Seat Cover - Harmony DREAMTIME 2 Manuel D'instructions

It is recommended to store the unused shoulder belt
guide along with any other parts from the booster seat
for future use.

USING SHOULDER BELT GUIDE

1. Slide the vehicle's shoulder belt
into the RED clip ensuring it is flat.
Position the belt guide just above
the child's shoulder ❶.
! THE VEHICLE'S SHOULDER BELT
MUST LIE ACROSS THE CHILD'S
SHOULDER.
! OPENING OF RED BELT GUIDE CLIP
MUST FACE FORWARD.
! All straps MUST be tight and
NOT twisted. ALL slack MUST be
removed from lap and shoulder portions of the 3-point
vehicle belt to ensure a snug fit.

REMOVING/INSTALLING FABRIC SEAT COVER

Headrest: Unhook the left and right ELASTIC loops from
each shoulder belt guide ❶.
Backrest:
• Unhook the left and right
ELASTIC loops from their
respective buttons ❷.
• Unhook
ELASTIC loops from each of
the T-shaped extensions at
the base of the backrest ❸.
Base: Detach hook and loop tab
from back of seat.
TO INSTALL:
To reinstall fabric pads, repeat
previous steps in reverse order.
left and
❶
Belt Guide Shoulder Belt
❶
right
❷
❸
❶
❷
❸
24