Entanglement With Vehicle Seat Belt; Aircraft Installation; Instruction Manual Storage - Harmony DASH Manuel D'instructions

! THE VEHICLE'S SHOULDER BELT MUST LIE ACROSS
THE CHILD'S SHOULDER.
! All straps MUST be tight and NOT twisted. ALL slack
MUST be removed from lap-and-shoulder portions
of the vehicle belt to ensure a snug fit. THE LAP BELT
PORTION MUST PASS UNDER BOTH ARMRESTS AND
BE POSITIONED LOW ON THE HIPS.

ENTANGLEMENT WITH VEHICLE SEAT BELT

! WARNING: To avoid possible entanglement and
choking with your vehicle's shoulder belts, Harmony
Juvenile Products recommends that the following
precautions are taken when installing your booster seat:
1. Pull the shoulder portion of the vehicle seat belt all
the way out until the retractor locks.
2. SLOWLY let the seat belt retract until it is snug against
your child.
3. ENSURE that the seat belts do not press on the
child's flesh or push the child's body into an unnatural
position.
4. Do the same for all unused vehicle seat belts.
!
Teach your child that seat belts are not toys and should
NEVER be played with, regardless of whether the car is
in motion or not.
! ALWAYS be aware of what your children are doing in
the back seat.
This booster seat is NOT CERTIFIED for aircraft use. Aircraft
seats are not equipped with 3-point lap-and-shoulder
belts which are required for use with this booster seat.

INSTRUCTION MANUAL STORAGE

We recommend that you store
your instruction manual under
the fabric cover on either side of
the booster seat.

AIRCRAFT INSTALLATION

20